Morris Minor Owners Club

Hi

The needle seem to just have gotten stiff as I haven't driven it for some time. Problem was that the choke will move it down. It however stayed down even after choke was closed.

Some oil and open and closing it a few times and alls well.

Hi I took my Morris out for a spin today. The engine did not sound happy at all. Eventually it cut out and simply did not want to start. I then checked that there were spark. Found great spark. Then checked for fuel in the carb. All fine. By pure luck I noticed that the needle moved down. What can c...

Hi
The engine was totally rebuilt. Where can I source the cover with a tin can 'catch pot' pointing upward?
I did check the pie and it is clean.

Nope dripping out of pipe and covers are dry.

Hi

What can I do to stop oil leaking out of the tappet cover pipe. (on side of engine)
Every time I stop there is oil leaking out of this pipe.

Thanks

If I may join this discussion - I have oil dripping from the pipe that exists the side cover of the engine.
What can I do to fix this?

Thank you

Hi
My srews were cut of when the machinng of the engine was done.
How do I get them out to replace with new ones?

Thank you

Hi
Can anyone tell me what can be done to repair leaking dampers? Is there a kit that one can use to repair these dampers?

Thanks

Hi I need advice regarding my 948 engine. My engine was rebuilt with new pistons, ring, bearings and valves, air filter, spark plugs, and points/condenser. If I set my timing according to the manual she runs fine but has two problems. The first is that she would cut out as soon as you take your foot...

I have tried that - did it myself to check it.

Hi I have just had my engine rebuilt with new pistons, rings, bearings and all gaskets. I battled to start the engine until I discovered that the timing was way out. There were a lot of bangs before starting. On closer inspection I discovered that there is water coming out of the cylinder head bold ...

Hi

Thank you for the information. Those were the ones I thought had to be right.

Regards
Rob

Hi

Can anyone help me with the different torque settings for a 948 engine? I am in the process of assembling the engine as soon as I have all the parts back from machining.

Thanks
Rob

I replaced the inner bushes of my Morris yesterday. The rubber bushes was however almost none existent.[frame][/frame]

Thank you for this visual demonstration. I will now also be replacing the bushes on my car. I have replaced all but these.
Regards
Rob

Hi

Thank you very much for the information. The scratches do not seem to be too deep.
I am definitely going to try it.

Regards
Robert

Hi

Can anyone give me some advice on how to remove surface scratches on the side windows of my Morris?

Thanks

Hi
I am experiencing the same problem. I have however fitted a new cable recently.

Hi

Can anyone tell me whether the Morris panel van was painted in the same colours as what the cars were painted?

Thanks

Wow that looks great!