Search found 6 matches

by lincschris
Sat May 11, 2013 12:04 pm
Forum: Electrical
Topic: Red ignition light staying on
Replies: 3
Views: 912

Re: Red ignition light staying on

All sorted now. The fan belt was fine. As I said I was getting a charge when I took one of the leads off the dynamo & tested between the lug on the dynamo & the wire. Now I've put the wire back on the light goes out, so I guess the problem was dirt or slight corrosion in that connection whic...
by lincschris
Sat May 11, 2013 9:15 am
Forum: Electrical
Topic: Red ignition light staying on
Replies: 3
Views: 912

Red ignition light staying on

My saloon has been laid up in the garage over winter and I started it up last weekend (impressively on the 2nd attempt) but the red ignition light is staying on. I have checked the output with a voltmeter between the top wire and the lug on the dynamo and there seems to be plenty being generated (fl...
by lincschris
Tue Jul 17, 2012 10:16 pm
Forum: Mechanical
Topic: Trunnion replacement first timer
Replies: 47
Views: 14431

Re: Trunnion replacement first timer

I've now read this & several other forum threads in great detail & am completely mystified. I need to replace the near side lower trunnion quite urgently (MoT fail) & have never done it before. I can't decide what the right sequence should be to achieve this and diferent threads seem to ...
by lincschris
Wed May 02, 2012 9:03 pm
Forum: Mechanical
Topic: Jack & Axle Stand Points?
Replies: 4
Views: 1076

Jack & Axle Stand Points?

I need to fit some front & rear bump stops and would welcome any advice on where to jack up and place the axle stands

Thanks,
Chris
by lincschris
Sun Mar 11, 2012 1:15 pm
Forum: Electrical
Topic: Replacing Bulbs in Speedo
Replies: 4
Views: 2280

Re: Replacing Bulbs in Speedo

Thanks for the help. Speedo now been taken out & put back in, just got to find a supplier for the bulb as neither of my local stockists have them
by lincschris
Sat Mar 10, 2012 7:03 pm
Forum: Electrical
Topic: Replacing Bulbs in Speedo
Replies: 4
Views: 2280

Replacing Bulbs in Speedo

I'm new to all this so don't know if I'm posting to the wrong place but here goes.... How do I get to the back of the speedo to replace the bulbs? I'm down to the last one (the old manual that I've got suggests that there should be 2 or 3 from the wiring diagram) but doesn't tell me how to replace t...