Morris Minor Owners Club

Request for the following 1. The picture of frame nut for door hinges both on the door and the frame. 2. What is the counter sunk screw size at Striker plate and door locating socket.? The thread type. ? 3. What type and how the frame nuts are located for these striker plate and door locating socket...

Those are the bolts which hold the door hinge onto the pillar I think you'll find. There should be 14 of them: 4 on each top hinge and 3 on each bottom. As an aside: Every Minor as far as I know has 4 bolts (or nuts) on each wheel, so there should be 16 of them in total. Thanks and yes, you are rig...

Hi All,
The car is all stripped and what i observed is that the mechanic has not made a note or grouped the bolts & nuts removed.
Request for support to identify, the first sets is attached below.

regards

Thanks Mr Svenedin,
Thank you, I will check with the full kit received and try.
regards

Hi Sven, Thank you for identifying them. Found them along with wiper arm and wiper motor and the wheel box set. Do you have any picture on where actually will they be going ? One of the wiper arm first 2 threads are damaged. Any idea on the thread pitch so that i can tap it right. Bought these from ...

.

Hi ,
I found this in my spares , wondering is this part of my series mm car. ?
request to check please.
Regards

hello All,
Posting after a very long time.
Request for details for fixing the original wiper motor , mounts , brackets , wiper drive cable and the wiper arms.
looking for the location to fix the wiper motor route of the wiper drive cable.
Series mm, low light, split screen.
regards
Pradeep

What is the nut thread size for the oil bath filter. Need to but a nut .
picture is as shown below.

Hi,
Got the following items from the Spares man Mr Bryan.

Wiper motor, mount and brackets SH
Wiper drive cable, wheel boxes etc SH
Wiper arms black 2 no's
Rear brake cylinders Lockheed 2 No's
2 carbon brushes and springs for the distributor.

They shall be reaching here tomorrow.

Hi,
Thanks Mr David... means i can go ahead with the 165/80 R14 tires.
I will be making approx 20 miles per week or say 60 miles per month, unless i decide to go for a long drive..

Anybody having information on servicing details of the front suspensions ?

The car Rim size is 14inch dia and the width is 4 1/4 inches. have a marking "LP555" inner side of the disc/rim and PAT No 56866

What about the tire size 155/70 R14, these are available here in india.

[frame][/frame]

read some posts on tire size, iam searching for 155/80 R14 size tires since 2 weeks and are not available/out of production long back neither the dealers have them in stock here in India.
165/80 R14 are easily available can i put them to my low light minor.

Please advice.

Hi, Mr Bryan doesn't seem to have the front suspension service kit. Kindly let me know from where can i get them or any manual with pictures would help me get it serviced locally or do it myself here in india. What is the approximate resistance(Ohms) of the petrol tank float when at full tank and at...

Hi, The hub caps for you minor is 8.1/2 " . plain ones look better unless you want an "M" on it. Below Links for your reference. similarly there are couple of other suppliers. http://www.morrisminorspares.net/shop_item.php?ID=3788 http://www.morrisminorspares.com/wheels-tyres-c94/whee...

DAVIDMCCULLOUGH wrote:Congratulations and well done on getting the MM back on the road!

Thank you!!! yeah it felt good to see it go through city after almost 2 decades.

panky wrote:Congratulations on the car and your big day - both look amazing

Thank you for the wishes!! cheerzzz

Mr Rob Thomas,
Thanks for the links..

Hi Guys, Fixed the cables. Was getting high value above 50000 ohms so had to change some thing.... got 0.8mm/0.0315 inches thick copper plates and made rings for the gripping on cable and proper contact inside the cap. other side have got its original connectors. Now the value on all 5 cables is app...

Hi, The cables i got new do not have resistors. I will have to check whether anything as such is mentioned in spark plugs that i have been using. The present HT wires that i have are of copper core/wire, without resistors and the end connectors are very loose and do not hold well on the spark plug. ...

hi, After getting spark plug cables from a friend of mine. 1. These are ignition set cables meant for old GMC vehicles 6 or 8 cylinders. 2. quality looks good neatly crimped etc. 3. Both ends of cables have boot protectors/guards. 4. i can make 3 sets from these cables. Now the question the cable co...