Search found 4716 matches

by simmitc
Thu Jul 25, 2024 6:00 pm
Forum: General Discussion
Topic: DVLA and tourer/electric conversions
Replies: 5
Views: 148

Re: DVLA and tourer/electric conversions

One interpretation of the rules is that any change to a monocoque shell will result in its registration be voided and a Q-plate issued. You drilled a hole to fit a light switch, seat belt, aerial, washer bottle in non-original position, run a wire through the bulkhead, fit a speaker? You modified th...
by simmitc
Thu Jul 25, 2024 9:28 am
Forum: General Discussion
Topic: DVLA and tourer/electric conversions
Replies: 5
Views: 148

Re: DVLA and tourer/electric conversions

Currently a change of engine from petrol 803cc side valve engine to petrol V8 or twin cam will not usually affect the historic status but a change to electric will automatically lose it. The conversion industry has experienced this problem and made representation; and I suspect that this is one reas...
by simmitc
Tue Jul 23, 2024 4:43 pm
Forum: General Discussion
Topic: I bought another one
Replies: 28
Views: 629

Re: I bought another one

If you do need to attach a tow rope to the front of the car, then the tie rods have always been the favoured place. However, be careful to not catch the number plate. I have always carried a toe rope and used it on quite a few occasions - to tow more modern vehicles that have failed to proceed. For ...
by simmitc
Sun Jul 21, 2024 5:26 pm
Forum: Other
Topic: Smelly Morris problem
Replies: 5
Views: 275

Re: Smelly Morris problem

Deceased rodent under the carpet or rear seat? :o
by simmitc
Sat Jul 20, 2024 8:52 pm
Forum: Mechanical
Topic: Can no one provide a gearbox and brake fluid extension filler pipe
Replies: 20
Views: 404

Re: Can no one provide a gearbox and brake fluid extension filler pipe

Years ago I bought a 1 litre bottle of oil. It cam with a semi-flexible pipe attached to the cap. Ever since them, I just refill it from a 20 litre drum whenever I want to top up the gearbox. Remember that you need to be able to see the filler hole to get the correct oil level. I use the same type o...
by simmitc
Sat Jul 20, 2024 8:40 pm
Forum: General Discussion
Topic: Do you have an opinion on Autonomous Vehicles?
Replies: 13
Views: 388

Re: Do you have an opinion on Autonomous Vehicles?

We do know, it's no secret, but not published here to avoid them being found by spammers.
by simmitc
Thu Jul 18, 2024 1:26 pm
Forum: General Discussion
Topic: Do you have an opinion on Autonomous Vehicles?
Replies: 13
Views: 388

Re: Do you have an opinion on Autonomous Vehicles?

It's interesting to read the opinions, although the purpose of the topic is to find participants for the focus group. Given the number of accidents that occur every year as a result of human failings, would an autonomous vehicle be any worse? How many times do you see human idiots driving too close ...
by simmitc
Wed Jul 17, 2024 5:40 pm
Forum: General Discussion
Topic: Do you have an opinion on Autonomous Vehicles?
Replies: 13
Views: 388

Do you have an opinion on Autonomous Vehicles?

We have been approached by the University of Leeds to see whether any of our members would like to participate in a Focus Group discussion Autonomous Vehicles. I shall quote: One of these groups should be recruited from people who are pretty individualistic, very pro cars, but not so positive about ...
by simmitc
Sat Jul 13, 2024 11:51 am
Forum: General Discussion
Topic: SNF307K
Replies: 5
Views: 217

Re: SNF307K

Contact the MMOC office and ask if they can trace previous owners of the car from club records. If yes, then they will be able to pass your details to any previous owners who are still about. No guarantee of results, but worth a try,
by simmitc
Sat Jul 13, 2024 11:47 am
Forum: Mechanical
Topic: rear diff temperature normal driving
Replies: 2
Views: 144

Re: rear diff temperature normal driving

It probably depends on what temperature is defined as "hot". 40 degrees C, not worried, 85 I would be; but I'm afraid that I don't know what the "normal" is.
by simmitc
Fri Jul 12, 2024 6:53 pm
Forum: Electrical
Topic: converting to 2 speed window wiper
Replies: 3
Views: 184

Re: converting to 2 speed window wiper

Are you referring to a 948cc Minor 1000 with one piece windscreen, or the earlier cars? If 948 and If you fit the same motor (from a Mini) as used for the tandem wipers, then the slow speed is slightly slower than the current one and the fast speed is a lot faster. Really worth it if you use the car...
by simmitc
Thu Jul 11, 2024 9:46 pm
Forum: Bodywork
Topic: water proof wood frame
Replies: 1
Views: 229

Re: water proof wood frame

Moved from Cars for Sale to Bodywork so that replies can be posted. Put 10 Traveller owners in a room and you'll get at least 12 different answers to your question :roll: To narrow it down a bit, is the car for show or daily use? Is it garaged or kept outside? Do you know what is on there at the mom...
by simmitc
Tue Jul 02, 2024 9:35 pm
Forum: General Discussion
Topic: Compressors
Replies: 4
Views: 269

Re: Compressors

Given that the site you quoted is currently giving a 403 error, I would be wary.
by simmitc
Tue Jul 02, 2024 9:28 pm
Forum: Mechanical
Topic: Slight 'growl' under acceleration
Replies: 13
Views: 500

Re: Slight 'growl' under acceleration

Have a look at the air filter. Has the intake silencer tube either come loose or fallen off completely? They tend to crack around the joint, and then you get a throaty roar under acceleration.
by simmitc
Tue Jul 02, 2024 10:54 am
Forum: Mechanical
Topic: Stud broke holds choke bracket
Replies: 5
Views: 220

Re: Stud broke holds choke bracket

Ah, now I understand. Good job on fitting the spring. The cam acting on the throttle screw is a fast idle device and the operation you describe is completely correct. The screw should be set so that with the choke off, there should be no contact between the screw and cam; the throttle stop screw is ...
by simmitc
Tue Jul 02, 2024 10:49 am
Forum: Mechanical
Topic: Piston pressure check what you think
Replies: 2
Views: 153

Re: Piston pressure check what you think

I'd be happy wit those. I would repeat number 2 to see if it gets any closer to the others. As those were dry readings, it would be interesting to add a little oil and repeat all readings to see if there's any significant difference; and check valve clearances on number 2; but nothing of concern.
by simmitc
Mon Jul 01, 2024 9:43 pm
Forum: Other
Topic: Does it do any harm adding a additive even if your heads ben done
Replies: 2
Views: 217

Re: Does it do any harm adding a additive even if your heads ben done

It probably depends on what the additive is. If referring to something like Castrol Valvemaster as a lead replacement, then no harm at all in using it. If some of the snake oil miracle cures, then don't waste the money. The modification for using unleaded fuel is hardened valve seats, and the only w...
by simmitc
Mon Jul 01, 2024 9:35 pm
Forum: Mechanical
Topic: Stud broke holds choke bracket
Replies: 5
Views: 220

Re: Stud broke holds choke bracket

Sorry, I'm having trouble understanding to which parts you are referring. The choke cable is solid. When you pull on the knob, it lowers the jet to enrich the mixture. When you push the knob in, the jet is raised. There is no return spring involved. The cable passes through the body of the carb, not...
by simmitc
Mon Jul 01, 2024 6:54 pm
Forum: General Discussion
Topic: National Rally 2024 - Feedback
Replies: 4
Views: 406

National Rally 2024 - Feedback

2024 was the first time that we have tried a rally at this location, and so would really like to know what everyone thought. What was good, what was not good? What did you think of the location and site? If yo did not attend, why not, what would attract you to come to a rally? All feedback, good or ...
by simmitc
Mon Jun 24, 2024 1:48 pm
Forum: General Discussion
Topic: What’s happening at the National Rally?
Replies: 8
Views: 572

Re: What’s happening at the National Rally?

Timings:
Gates open 08:00 for Morris Minors.
All Branch Avenue and display cars must be in place by 10:00.
Museum and rally open to general public at 10:00.