Morris Minor Owners Club

ok all
Many thanks for your advice , l will connect it to the carb.
bye for now
Dave

Thanks all for the info . l will change the pipes and see what if anything happens. ps ....l do have one pipe that goes from the carb to the distributor,also another thats blanked off,so l will reconnect that to the rocker cover and as suggested leave the air filter connection off. Cheers all and ha...

Hello all l have a question regarding where the rocker cover breather tube should go to, At present the tube goes from the Rocker cover to the air filter ,l noticed that there is a vacum tube that has been blanked off on the side of the carb,l thought the breather pipe from the Rocker cover should g...

Charlie
cheers the info will be useful
thanks
Dave

hi
l have wired the radio in it llights up ok but when i connect the earth wire it blows a fuse any idea's please.The car is negative earth
regards Dave

Hi
thanks for that
regards Dave

hello all

Can you please advise me the best way to wire in my Motorola Radio to my Minor

Thanks in anticipation
Dave

hi Mike
just as a back up if the door stays do not continue to work what type and what cost were they
regards Dave

Hello All " Sorted " l have managed to sort out the problem, when l stripped the stay down and looked at it l found that the stay Bar was slightly bent and the pin that holds the spring was also bent.These were both straightened. Interestingly there was a new spring in this section. My nex...

hello all

Thanks for the info l will try and see what i can do with the suggestions from the link.
cheers and happy motoring,here is a picture of my traveller[frame][/frame]

hi
the problem is that the door stay does not keeep the door open,l have fitted replacement hinge repair kits,because they were worn, but its the stay Bar pin that i assume has a spring to hold it down,this does not seem strong enough to hold the door open.
regards Dave

The left rear door stay to my 1966 M0orris Traveller needs either adjusting or renewing can anyone gve me any information to get it working ok again.

Hello
l am looking for the bulb holder and a bulb to fit the Holder that fits into the rear of a Smiths ammeter to light up the face.
please let me know if you have one and the price
Many thanks
Dave

hello david here are the pictures The car is at Town Country Repairs Unit 1 Burnt House Farm,Udimore Road Broad Oak Brede. Rye. East Sussex.TN31 6BX telephone 01424 883311 [Gary] [frame] http://mmoc.org.uk/mbimage.php?src=1294686161_13132 [/frame][frame] http://mmoc.org.uk/mbimage.php?src=1294686506...

Hello David,
Yes l will try and get a photo and the name and address of the owner.
l have known this car for many years and it will need a lot of work.
l am local well about 6 miles away from it. l live in Rye,so give me a couple of days to get back to you.
Are you local as well ?

regards Dave Benn

Thanks for that.

thanks for that Mike i will give it a go.here is a picture of her .[frame][/frame]

l think it may be the brushes because it sounds like the motor is labouring.Only when it first starts up,l have tried switching it off and on it still does the same.
Could it be a bearing,if so what is the best metheod repair/renew??
It is a standard heater.

when i start my fan on my heater it makes a noise,it does not seem to be running at full speed what can i do?

thanks for the info looks ok l will give it a go