Morris Minor Owners Club

the ad is for one new tyre in excellent condition £45

new tyre on wheel 145r14 £50 also comes with another wheel and tyre free, tyre has a hole in the side wall pick up hornsea east yorkshire

[/attachment]brand new 145r14 tyre on rim £80 tune up kit gunstones testune, strobe light, colortune, £15 each or £30 the lot, speedos about 3 of them, spares repair indicator switches, a 945cc gearbox and radiator, and 4 brand new chrome wheel trims £20 the lot for £110 IMG_2032.JPG IMG_2031.JPG IM...

i have a smooth gearbox that came out of a 59 minor it has had new bearings and was running fine when it jammed coming from 1st to2nd gear i took off the side cover moved the selector and was fine again it then got jammed again after about 50 miles so decided to fit a different box in the car, it co...

2 wires go from the hazard switch to the indicators, the indicators work okay with one of the wires (l) from the tin can to the no 1 terminal of the relay, its a 59 morris minor with trafficators which work and if you have a bmc workshop manual its page N38 wiring diagram i have been working off the...

i have all the wiring now connected, as i dont have wire coming from the ignition to the tin can x (wire from x to fuse box on this car) so cut this wire and joined the two wires i had left to either end, the hazard warning light and the hazard relay is working but the indicators on the four corners...

thanks Stephen and Bill i will have another look tomorrow, the hazard switch i got from esm i think it was about £28 the two wires i have left are both green and red i did get the instrutions with the switch but they dont match the wiring on the car (i dont have the wire from the ignition switch goi...

i have now got the indicators working and trying to fit a hazard switch all wiring to hazard switch sorted except the two wires that are supposed to go to the ingnition switch wire that goes to the indicator tin can but i have a 1959 minor and the wire from the ign switch goes to the fuse box not th...

hi, i have a 1959 4 door morris minor 945 engine, i have replaced the indicator stalk ( esm) but i am having problem with the wiring there are six wires coming from it green-white-green-red which i know go to either side which are connected,, A earth wire and the wire for the horn a wire for the sta...

hi, i have found a supplier that sells old but new wiper boxes on ebay they are called jolly-old-car-spares-ltd hope this helps

hi, i had the wrong speedo drive in the gear box, it was the brass nut one, found a plastic drive and the speedo works as it should

a new one for the pinion & bush speedometer drive housing the size is 1.1/8inch nut

hi, i found the size its 1 1/8 inch i have ordered a box spanner so hopefully it will do the job still dont know if i have the right speedo drive

hi, can anyone tell me the spanner size for the speedometer drive housing nut its a brass nut not the plastic one, just taken the car (A 1959 morris minor with 948 gearbox )out on a test run after more than 2 years of fixing it up to a good standard and found that the speedo is not working i attache...

hi i am striping the window frames and have found that some of the steel corner brackets have which hold the frame together have rusted away looked on esm they dont have any, anybody know where i can buy some cheers

cheers mate

hi simmitc one last question where does the return spring fit on to. cheers

thanks simmitc for the great advice but i had to take the nearside gearbox mounting off push it across and finally got the shaft in cheers

I have fitted the engine and gearbox into the car all tightened down and then i decided to install the new the clutch pedal linkage with a new relay shaft what a nightmare which ever way i tried to fit it seems too long other than taking the engine back out how do you install the shaft i would be gr...

hi does anybody know where i can buy the circlip that fits in the end of the master cylinder, i have tried the normal places but no luck