Morris Minor Owners Club

I have fitted a recon fuel pump bought from the club car runs great now , the new pump is louder than the electronic one

has anyone had trouble with a modern electronic fuel pumps? mines been rather troublesome its ok for about 10 miles but after that it just cant keep up fuel flow needed

on my 67 2door saloon the key fits everything but the passenger door i assume the door has been changed at some point , how do i find out the key number for it?

Has anyone got any tips on fitting rear seat belts to a 1967 2 door saloon?

ok thanks

im changing rear hub seals on my 1967 saloon do i fit the gasket on the halfshaft dry? i was thinking about a smear of wellseal i was wondering what others do

i have just rebuilt my 1098 engine it was a goldseal engine it had the same bolts in as yours in i assumed the factory fitted them i have reused them.

Hi my morris has the same identification on i found this on a website;
All engines pre-fixed with 'GSE' or 'RKM' were of UNIPART origin when BL split its parts organisation.

'E' at the end of a part number denotes it is a reconditioned, service unit only (basic engine assembly with no ancillaries).

Hi does anyone know what the smiths number is for correct speedo for a 1967 2door saloon?

i rebuilt the engine myself with a few tips from this site, i made the engine lifter it worked great didnt have to take the bonnet of just the front panel

ive got my engine back in my morris this afternoon just got all the bits to connect up after a full build thought i would send a pic of my progress[frame][/frame]

Thanks for all the replies i have put the head on totally dry and clean

Thanks for that

do i fit the head gasket on a 1098 engine dry or with a smear of wellseal or something?

im rebuilding my 1098 engine at the mo, it had valve stem oil seals on the valve guides but the parts book shows that an o-ring should be fitted, my valve guides were very worn is this because the seals that were fitted stopped any lubrication to the valve stems, im just wondering which method is pr...

I am rebuilding my 1098 A series engine is recommended that i fit new con rod bolts when i put it back together?

thanks for that i will make a tool up to set the distance

does anyone know what the measurement is that the valve guide protrudes in to the top of the cylinder head on a 1098 engine